Skip to content
OpenTrain AIFor AI Companies

From AI Surrogate to Engineering Tool: Toward Production Use of Fiber-Orientation Prediction in Crash CAE

Osamu Ito, Yoshikazu Nakagawa, Tomoaki TatsukawaPublished Nov 19, 2026
arXiv PDF
Researcher verdict
Context only
Use as context only
Benchmark evidence
Missing
Not verified yet
Time to first repro
A few days
Plan setup time
Risk flags
2
Review before use

Abstract

Domain fit: Niche / domain-specific · No strong AI-core implementation/artifact signals were detected from current providers.

Crash simulations of glass-fiber-reinforced plastic parts are highly sensitive to the fiber-orientation field supplied to the material model. In conventional workflows, that field comes from resin-flow analysis, which requires molding-specialist support and takes about 25 hours of work per part. We previously proposed a surrogate model that addresses this bottleneck by predicting the orientation field in about 3 minutes. This paper reports the implementation, validation, and operational design that turned the model into an engineering tool for Honda design workflows. We present staged validation from 2D plates to production parts, evaluation against a predefined engineering angular-error criterion, and the expert review that approved design use in March 2025; the system has since been transferred to the crash-safety group and is in initial, limited use in directed fracture-prediction scenarios. The developed system combines injection-gate setting support for cases in which gates are unknown (90% gate-count accuracy, mean position error 11% of flow length), voxelization, surrogate inference, automatic mapping to the crash CAE model, and report generation in a single GUI. The complete orientation-preparation workflow takes about 0.1 hours, a 99.6% reduction from the conventional 25-hour flow-analysis route, and can be run directly by crash CAE engineers without molding-specialist support. As evidence of practical impact, component-level crash analysis using the predicted orientation field reduced the absolute peak-force error from 19.0% with an isotropic baseline to 11.4%, while confining predicted fracture to the test-observed region. The deployment lesson is that a surrogate model alone is not enough for practical adoption: gate-setting support, automatic data conversion, and shareable reporting are what make the model usable as a design tool.

Results and benchmarks

Freshness tier: warm
Crash simulations of glass-fiber-reinforced plastic parts are highly sensitive to the fiber-orientation field supplied to the material model.

Implementation

No direct implementation yet

Maintained implementation evidence is not confirmed for this paper yet.

Use the implementation status and reproduction sections for the current action plan.

Implementation evidence summary
Confidence: low

Recommendation evidence is currently too limited for a maintained-repo choice. Use Implementation Status and Reproduction Path for a practical baseline plan.

Reproduction risks
  • Estimate is based on paper-only reproduction flow

Reproduction readiness

Time to first repro: days
Last checked: Nov 22, 2026

No repo

No verified implementation available

  • No maintained repository has been identified for this paper. Check adjacent implementations or HF artifacts below.

Hardware requirements

  • Expect multi-day setup/compute for meaningful reproduction based on current guidance.

Hugging Face artifacts

No trustworthy direct or curated related Hugging Face artifacts were found yet. Use targeted searches to quickly locate candidate models, datasets, and demos.

Tip: start with models, then check datasets and spaces if you need evaluation data or demos.

Research context

Tasks

Scientific computing

Methods

None detected

Domains

None detected

Evaluation and human feedback data

Open this paper in HFEPX to review benchmark signals, evaluation modes, and human-feedback protocol context.

Open in HFEPX
Explore similar papers

Jump to Paper2Code search queries derived from this paper's research context.